MSI Optix MPG27CQ User Manual

Appendix
A-5
A-4
Troubleshooting
The power LED is o󰓐.
■ Press the monitor power button again�
■ Check if the monitor power cable is properly connected�
No image.
■ Check if the computer graphics card is properly installed�
■ Check if the computer and monitor are connected to electrical outlets and
are turned on�
■ Check if the monitor signal cable is properly connected�
■ The computer may be in Standby mode� Press any key to activate the
monitor�
The screen image is not properly sized or centered.
Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display�
No Plug & Play.
■ Check if the monitor power cable is properly connected�
■ Check if the monitor signal cable is properly connected�
■ Check if the computer and graphics card are Plug & Play compatible�
The icons, font or screen are fuzzy, blurry or have color problems.
■ Avoid using any video extension cables�
■ Adjust brightness and contrast�
■ Adjust RGB color or tune color temperature�
■ Check if the monitor signal cable is properly connected�
■ Check for bent pins on the signal cable connector�
The monitor starts 󰄉ickering or shows waves.
■ Change the refresh rate to match the capabilities of your monitor�
■ Update your graphics card drivers�
■ Keep the monitor away from electrical devices that may cause
electromagnetic interference (EMI)�

MSI Optix MPG27CQ Specifications

General

3D	No
Panel type	VA
Pixel pitch	0.2331 x 0.2331 mm
Display diagonal	27 \
Screen curvature	1800 mm
Display technology	LED
Native aspect ratio	16:9
NTSC coverage (typical)	100 %
Screen curvature rating	1800R
Viewable size, vertical	335.664 mm
sRGB coverage (typical)	115 %
Contrast ratio (dynamic)	100000000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	596.736 mm
Digital vertical frequency	48 - 144 Hz
Digital horizontal frequency	70.56 - 214.56 kHz
Display brightness (typical)	400 cd/m²
Supported graphics resolutions	2560 x 1440
On/off switch	Yes
Product color	Black
Market positioning	Gaming
USB hub version	3.2 Gen 1 (3.1 Gen 1)
USB upstream port type	USB Type-B
Number of upstream ports	1
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	2
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Input current	4.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	90 W
Package weight	10600 g

Weight and Dimensions

Depth (with stand)	379.3 mm
Width (with stand)	612 mm
Height (with stand)	555.8 mm
Weight (with stand)	7600 g