To Next Page

To Previous Page

Getting Started

Installing the Monitor Stand

1. Leave the monitor in its protective foam packaging. Align the stand bracket to the

monitor groove.

2. Tighten the stand bracket with screws.

3. Connect the base to the stand and tighten the base screw to secure the base.

4. Make sure the stand assembly is properly installed before setting the monitor

upright.

⚠

Important

∙

Place the monitor on a soft, protected surface to avoid scratching the display panel.

∙

Do not use any sharp objects on the panel.

∙

The groove for installing the stand bracket can also be used for wall mount. Please

contact your dealer for proper wall mount kit.

Other manuals for MSI Optix Series

Questions and Answers:

Need help?

Do you have a question about the MSI Optix Series and is the answer not in the manual?

General