MSI P45T-C53 Series - Page 46

BIOS Setup ▍
MS-7519
3-7
BIOS Setup ▍
MS-7519
IDE Prmary Master/ Slave & SATA1~6
Press <Enter> to enter the sub-menu, and the followng screen appears.
Devce / Vendor / Sze
It wll show the devce nformaton that you connected to the SATA connector.
Important
IDE Prmary Master/ Slave, SATA 1~6 are appearng when you connect the HD devces
to the IDE/ SATA connectors on the manboard.
Floppy Drve A
Ths tem allows you to set the type of 󰘱oppy drves nstalled.
Hold On
The settng determnes whether the system wll stop of an error s detected at boot.
When the system stops of the errors preset, t wll halt on for 15 seconds and then au
-
tomatcally resume ts operaton. Avalable optons are:
[All Errors] The system stops when any error s detected.
[No Errors] The system doesn’t stop for any detected error.
System Informaton
Press <Enter> to enter the sub-menu, and the followng screen appears.
Ths sub-menu shows the CPU nformaton, BIOS verson and memory status of your
system (read only).
▶
▶
▶
▶
▶