15
1st Level Menu 2nd/3rd Level Menu Description
Low Blue Light OFF ∙ Low Blue Light protects your eyes against
blue light. When enabled, Low Blue Light
adjusts the screen color temperature to a
more yellow glow.
∙ When Pro Mode is set to Anti-Blue, it is
mandatory to enable Low Blue Light.
ON
HDCR OFF ∙ HDCR enhances image quality by increasing
the contrast of images.
∙ Activating HDCR will affect:
Affected Function Function Status
» MPRT Set to OFF
» Brightness Unable to select
ON
Color Temperature Cool ∙ Use Up or Down Button to select and preview
mode effects.
∙ Press the OK Button to confirm and apply
your mode type.
∙ Users can adjust Color Temperature in
Customization mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Auto Config (PRO MP242A E2, PRO MP271A E2) ∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
Clock
(For D-Sub)
(PRO MP242A E2,
PRO MP271A E2)
0-100 ∙ Adjusting the clock to reduce Vertical-Line
noise.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
Phase
(For D-Sub)
(PRO MP242A E2,
PRO MP271A E2)
0-100 ∙ Adjusting the phase to reduce Horizontal-Line
noise.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
H.Position
(For D-Sub)
(PRO MP242A E2,
PRO MP271A E2)
0-100 ∙ Adjusting the horizontal position of the image.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
V.Position
(For D-Sub)
(PRO MP242A E2,
PRO MP271A E2)
0-100 ∙ Adjusting the vertical position of the image.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
To Next Page
Loading...
