15
OSD Menus
Professional
1st Level Menu 2nd/3rd Level Menu Description
Mode Eco ∙ Use Up or Down Button to select
and preview mode effects.
∙ Press the E Button to confirm and
apply your mode type.
∙ The default setting “Eco” mode
meets the requirements of
TÜV Rheinland’s “Low Blue
Light” standard and Eyesafe
certification.
User
sRGB
Anti-Blue
Movie
Office
Black-White
Response Time Normal ∙ Users can adjust Response Time
in any mode.
Fast
Fastest
MPRT OFF ∙ When MPRT is enabled,
Brightness cannot be enabled and
will be grayed out.
∙ HDCR and MPRT cannot be
enabled simultaneously.
∙ Response time will be grayed out
while MPRT is enabled.
∙ MPRT is available when the
refresh rate is over 75Hz.
∙ MPRT has to be disabled while
Adaptive-Sync is set to ON.
ON
Refresh Rate Location Left Top ∙ Location is adjustable in OSD
Menu. Press the E Button to
confirm and apply your Refresh
Rate Location.
∙ This monitor follows and works
at the Operating System’s preset
Screen Refresh Rate.
Right Top
Left Bottom
Right Bottom
OFF
ON
To Next Page
Loading...
Need help?
General
