18
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Color
Temperature
Cool ∙ Use Up or Down Button to select
and preview mode effects.
∙ Press the E Button to confirm
and apply your mode type.
∙ Users can adjust Color
Temperature in Customization
mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Input Source
1st Level Menu 2nd Level Menu Description
HDMI™
(PRO MP243P/ PRO MP273P)
∙ Select an Input Source from the list.
HDMI™ 1
(PRO MP273QP/ PRO MP273QV)
HDMI™ 2
(PRO MP273QP/ PRO MP273QV)
DP
Auto Scan OFF ∙ Users can use the Navi Key to select Input
Source at below status:
• While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
• While “No Signal” message box is shown
on the monitor.
ON
To Next Page
Loading...
Need help?
General
