13
1st Level Menu 2nd/3rd Level Menu Description
HDCR OFF ∙ HDCR enhances image quality by increasing the
contrast of images.
∙ Activating HDCR will affect:
Affected Function Function Status
» Brightness Unable to select
ON
Color Temperature Cool ∙ Use Up or Down Button to select and preview
mode effects.
∙ Press the Middle Button to confirm and apply
your mode type.
∙ Users can adjust Color Temperature in
Customization mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Auto Config ∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
Clock
(For D-Sub)
0-100 ∙ Adjusting the clock to reduce Vertical-Line
noise.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
Phase
(For D-Sub)
∙ Adjusting the phase to reduce Horizontal-Line
noise.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
H.Position
(For D-Sub)
∙ Adjusting the horizontal position of the image.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
V.Position
(For D-Sub)
∙ Adjusting the vertical position of the image.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
Input Source
1st Level Menu 2nd Level Menu Description
HDMI™ ∙ Select an Input Source from the list.
DP
D-Sub
Auto Scan OFF ∙ Users can use the Navi Key to select Input Source at
below status:
• While “Auto Scan” is set to “OFF” with the monitor at
power saving mode;
• While “No Signal” message box is shown on the
monitor.
ON
To Next Page
Loading...
