37
Components
EOL Instructions
Wireless Card Assembly
1. Locate and tighten the screws ❶ that secure the antenna with a cross-head
screwdriver.
2. Align the notch on the wireless card with the key on the slot, insert the wireless
card into the slot, and push the wireless card downwards.
3. Tighten the screw
❷ with a cross-head screwdriver to secure the wireless card
in place.
4. Connect the antenna cables
❸ to the wireless card.
5. Place the wireless card clip
❹ to the wireless card.
1
1
3
2
To Next Page
Loading...
