Preface
vi
Safety Instructions
Read the safety instructions carefully and thoroughly�
All cautions and warnings on the equipment or user’s manual should be
noted�
Keep the User’s Guide that comes with the package for future reference�
Keep this equipment away from humidity and high temperature�
Lay this equipment on a reliable at surface before setting it up�
Make sure that the power voltage is within its safety range and has
been adjusted properly to the value of 100~240V before connecting
the equipment to the power outlet� Do not disable the protective earth
pin from the plug� The equipment must be connected to an earthed
mains socket-outlet�
Always unplug the AC power cord before installing any add-on card
or module to the equipment�
Always disconnect the AC power cord or switch the wall socket o if
the equipment would be left unused for a certain time to achieve zero
energy consumption�
◙
◙
◙
The ventilator on the enclosure is used for air convection and to prevent
the equipment from overheating� Do not cover the ventilator�
Do not leave the equipment in an unconditioned environment with a stor-
age temperature above 60
O
C (140
O
F) or below 0
O
C (32
O
F), which may
damage the equipment�
NOTE: The maximum operating temperature is around 35
O
C�
To Next Page
Loading...
