MSI X58M - Motherboard - Micro ATX - Memory Installation and Population Rules

Hardware Setup ▍
MS-7593
2-7
Hardware Setup ▍
MS-7593
MeMory
These DIMM slots are used for nstallng memory modules. For more nformaton on com-
patble components, please vst http://global.ms.com.tw/ndex.php?func=testreport
DDR3
240-pn, 1.5V
48x2=96 pn 72x2=144 pn
Memory Populaton Rule
Please refer to the followng llustratons for memory populaton rules.
Sngle-Channel mode
When you have only one memory module, please always nsert t nto the DIMM_A0 󰘰rst
(as way 1 shown n below).
1
DIMM_A1
DIMM_A0
DIMM_B1
DIMM_B0
DIMM_C1
DIMM_C0
Dual-Channel mode
In Dual-Channel mode, the memory modules can transmt and receve data wth two
data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system
performance. When you have two memory modules, please always nsert them nto the
DIMM_A0 & DIMMB0 (as way 2 shown n below).
2
DIMM_A1
DIMM_A0
DIMM_B1
DIMM_B0
DIMM_C1
DIMM_C0
Installed
Empty