MSI X58M - Motherboard - Micro ATX - Switches - Base Clock Control

2-22
Hardware Setup ▍
MS-7593
Hardware Setup ▍
MS-7593
Switch
Ths manboard provdes the followng swtch for you to set the computer’s functon.
Ths secton wll explan how to change your manboard’s functon through the use of
swtch.
Hardware Overclock Base clock Swtch: CPU_CLK1
You can overclock the Base clock to ncrease the processor frequency by changng ths
swtch. Follow the nstructons below to set the base clock.
133 MHz
(default)
166 MHz 200 MHz
Important
Make sure that you power o󰘯 the system before changng the swtch.
Ths overclockng behavor depends on the system’s con󰘰guraton (memory capabl
-
ty, thermal soluton...etc), and t s not guaranteed.
You can also overclock by settng BIOS. BIOS overclockng may also cause crash
durng boot and then please reboot the system 3 tmes to restore default BIOS set
-
tngs. For more detals, please refer to the BIOS chapter.
When overclockng cause nstablty or crash durng boot, the followng warnng mes
-
sage wll dsplay durng POST (as pcture below). And then, please re-set the swtch
to default.
Warnng!!! OC swtch overclockng had faled,
Please shutdown and adjust oc swtch to lower frequency.
Try agan!
•
•
•
•