MSI X79A-GD65 (8D) Series - Page 27

En-26
MS-7760 Manboard
Voltage Check Pont Lte
These voltage checkpont are used to measure the current system voltages. A mult-
meter (not ncluded) wll be requred to check voltages. To check the voltage, set the
voltmeter swtch to “DC”, put the postve lead (red) on the postvtve pont of the voltage
source pont and the negatve lead (black) on the GND (ground) pont. The followng
table descrbes the voltage check ponts.
BATT
+
CPU_CORE
CPU_IO
CPU_SA
DDR_A/B
PCH_1P1V
DDR_C/D
GND
Pont Descrpton
PCH_1P1V PCH 1.1 voltage.
The PCH voltage s the voltage suppled to
the Platform Controller Hub.
DDR_C/D Memory channel C and D voltage. The DDR memory voltage
s the
voltage suppled to the DDR memory modules on the
manboard. Lower memory tmngs may requre hgher voltages
to mantan system stablty.
DDR_A/B Memory channel A and B voltage. Refer to DDR_C/D.
CPU_SA CPU system agent
voltage (MC). The CPU SA voltage s the
voltage suppled to the IMC (Integrated Memory Controller)
on the CPU. Hgher overclocks may requre a hgher CPU SA
voltage to mantan stablty.
CPU_IO CPU IO voltage
(Uncore). The CPU IO voltage s the voltage
suppled to the Uncore on the CPU. Hgher overclocks may
requre a hgher CPU IO voltage to mantan stablty.
CPU_CORE CPU core voltage.
The CPU core voltage s the voltage suppled
to the CPU core. Hgher overclocks may requre hgher CPU
core voltages to mantan stablty.
GND Ground
www.devicemanuals.eu