Need help?Do you have a question about the MSI XPower Series and is the answer not in the manual?
General| Brand | MSI |
|---|---|
| Model | XPower Series |
| Category | Motherboard |
| Language | English |
Important guidelines for safe operation and handling of the mainboard.
Diagram illustrating the location of key components and connectors on the mainboard.
Guidance on installing the CPU, preventing overheating, and handling.
Detailed instructions with images for installing the CPU and cooler.
Guidance on checking CPU seating and securing the cooler.
Final steps for securing the CPU cooler and connecting the fan.
Crucial reminders for successful CPU cooler installation.
Additional important points for CPU installation and fan connection.
Shows how to install memory for dual-channel mode.
Step-by-step guide for physically installing memory modules.
Illustrates how to install memory modules for single-channel mode.
Illustrates memory installation for triple-channel configurations.
How to ensure memory modules are correctly seated and locked.
Details the 24-pin ATX power connector and pinout.
Explains the 6-pin ATX power connector for graphics cards.
Describes the 8-pin ATX power connectors for CPU power.
Essential advice for connecting power supplies and recommended wattage.
Steps for installing two graphics cards for CrossFireX™.
Key conditions for enabling CrossFireX™ functionality.
How to enable CrossFireX™ using the Catalyst Control Center.
Steps for installing two graphics cards for SLI mode.
How to enable SLI using the NVIDIA driver utility.
Key considerations for SLI functionality.
Advice on disabling SLI when removing a graphics card.
Instructions on how to access the BIOS Setup utility.
Details for advanced users on overclocking and system tuning.
Explanation of C-State, OverSpeed Protection, and Hyper-Threading.
Detailed settings for advanced DRAM timings like tRCD, tRP, etc.
Information on CPU specifications, technologies, and features.
Settings for adjusting CPU base frequency, ratio, and overclocking steps.
Settings for controlling and configuring DRAM timings.
To Next Page