MSI X79A-GD65 (8D) Series User Manual

1-25
MS-7760
Chapter 1
After all of the hardware and software has been properly nstalled, reboot the
system. After enterng the operatng system (OS), rght clck on the desktop and
choose the “NVIDIA Control Panel”.
4.
Enter the NVIDIA Control Panel. Choose the “Maxmze 3D Performance” settng
to enable SLI mode. The con󰘰guraton screen s shown below. Dependng on your
operatng system, the screen may look d󰘯erent.
5.
Important
Please ensure that all graphcs cards used n SLI mode are of the same brand and
spec󰘰catons. For best compatblty wth the manboard, MSI graphcs cards are
recommended.
Make sure to connect an adequate power supply to the power connectors on the
graphcs cards to ensure stable operaton.
If you wsh to remove one graphcs card and qut the SLI functon, make sure the
“Maxmze 3D Performance” functon s dsable before removng the graphcs card.
•
•
•
Choose ths tem

MSI X79A-GD65 (8D) Series Specifications

General

Brand	MSI
Model	X79A-GD65 (8D) Series
Category	Motherboard
Language	English