Chapter 1
1-35 Getting Started
Switch
BIOS1: Multi-BIOS Switch
This motherboard has two built-in BIOS ROMs (Labeled A and B, default BIOS ROM
is A). If one is crashed, you can shift to the other for booting by sliding the switch.
BIOS A
Green LED
Blue LED
BIOS B
When BIOS update fails or rendered the computer to be non-bootable, you can
recover the failed BIOS by following the steps.
Preparation:
BIOS recovery steps:
2. Slide the Multi-BIOS switch to the operational BIOS ROM.
motherboard.
BIOS and ME and then press “Enter” key.
automatically.
6. Slide the Multi-BIOS switch to the failed BIOS ROM and press any key to start the
BIOS update process when the message “Please set the multi BIOS switch to the
target BIOS ROM then press any key to continue” appears.
7. The system will restart after the BIOS update is completed.
To Next Page
Loading...
