OC_SWITCH6: OC Genie Mode Switch
This swtich provides two overclocking modes (Gear 1 and Gear 2) for OC Genie
operation. When you press the OC Genie button, the overclocking procedure will
be performed according to the setting of this switch. The Gear 1 Mode is the default
setting. The Gear 2 Mode allows the OC Genie function to overclock the CPU/ system
frequency higher then Gear 1 Mode.
Red LED
Gear 1
(Default)
Gear 2
Blue LED
Important
Gear 1 Mode: For normal users using original fan.
Gear 2 Mode: For OCers using better heat dissipation fan such as liquid cooling or
AUD_SW1: Audio Power Switch
Direct Power mode
Onboard Power mode
(Default)
Important
Before switching to "Direct Power mode", please make sure the “Direct Audio Power
Connector” (AUDPWR1) has been connected to the power supply.
Do not use the audio power switch while the system is on because it will damage
the motherboard.
To Next Page
Loading...
