34
BIOS Setup
▶ CPU Technology Support
Press Enter
installed CPU. Read only.
▶ MEMORY-Z
Press Enter
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
▶ DIMMA1/A2/B1/B2 Memory SPD
Press Enter
installed memory. Read only.
▶ CPU Features
Press Enter
▶ Hyper-Threading [Enabled]
multi logical processors that can execute instructions simultaneously. In this way,
the system performance is highly improved. This item appears when the installed
CPU supports this technology.
[Disabled] Disables this item if the system does not support HT function.
▶ Active Processor Cores Control [All]
Allows you to select the number of active CPU cores.
▶ Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled] BIOS limits the maximum CPUID input value to circumvent boot
problems with older operating system that do not support the
processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.
▶ Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run
multiple operating systems in independent partitions. The system
can function as multiple systems virtually.
[Disabled] Disables this function.
▶ Intel VT-D Tech [Disabled]
▶ Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
and instructions into L2 cache from memory for tuning the CPU
performance.
[Disabled] Disables the hardware prefetcher.
To Next Page
Loading...
