Jumper
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board with an external battery power supply to preserve the
system conguration data. With the CMOS RAM, the system can automatically boot
OS every time it is turned on. If you want to clear the system conguration, please
temporarily short these two pins to clear data by using a metal object.
Important
You can clear CMOS by touching two pins once with a metal object while the system is
o. Avoid clearing the CMOS while the system is on; it will damage the mainboard.
Keep Data Clear Data
(Use a metal object to
temporarily short these
two pins.)
To Next Page
Loading...
