MSI Z68A-GD65 B3 series

BIOS Setup
MS-7681
Chapter 3
3-21
BIOS Setup
MS-7681
Chapter 3
Make U-Key at
When the “U-Key” as sets to [Enabled], ths tem s selectable. Ths tem allows you to
specfy the USB drver devce.
Chasss Intruson Con󰘰guraton
Press <Enter> to enter the sub-menu.
Chasss Intruson
Ths tem enables or dsables the feature of recordng the chasss ntruson status
and ssung a warnng message f the chasss s once opened. To clear the warnng
message, set the 󰘰eld to [Reset]. The settng of the 󰘰eld wll automatcally return to
[Enabled] later.
Mult BIOS Auto Update (for Z68A-GD65 only)
When “Enabled”, and the prmary BIOS has faled, the system wll allow the secondary
BIOS to re󰘱ash the prmary BIOS for bootng successfully.
The screen wll show the progress message as below.
Mult BIOS auto update startng.
Flashng... XX%
Do not press any buttons to shutdown or restart the computer durng the BIOS 󰘱ashng
operaton.
Boot
Full Screen Logo Dsplay
Ths tem enables ths system to show the company logo on the boot-up screen. Set
-
tngs are:
[Enabled] Shows a stll mage (logo) on the full screen at boot.
[Dsabled] Shows the POST messages at boot.
== Set Boot Prorty ==
1st/ 2nd/ 3rd/ 4th/ 5th/ 6th/ 7th/ 8th Boot
You can select the boot prortes n these tems.
▶
▶
▶
▶
▶
▶