MSI Z77A-G43 GAMING

2-8
BIOS Setup
Intel(R) Rapd Start Technology
Press <Enter> to enter the sub-menu.
Intel(R) Rapd Start Technology
Ths tem s used to enable/ dsable the Intel Rapd Start technology.
USB Con󰘰guraton
Press <Enter> to enter the sub-menu.
USB Controller
Ths tem allows you to enable/ dsable the ntegrated USB 2.0 controller.
Legacy USB Support
Enable or dsable support for USB keyboards, mce and 󰘱oppy drves. You wll be
able to use these devces wth operatng systems that do not support USB.
Super IO Con󰘰guraton
Press <Enter> to enter the sub-menu.
Seral(COM) Port 0 Con󰘰guraton
Press <Enter> to enter the sub-menu.
Seral (COM) Port0
Ths tem allows you to enable/ dsable the seral port.
Seral (COM) Port0 Settngs
Select an address and correspondng nterrupt for the seral port.
Parallel(LPT) Port Con󰘰guraton
Press <Enter> to enter the sub-menu.
Parallel(LPT) Port
Ths tem allows you to enable/ dsable the parallel port.
Parallel(LPT) Port Settngs
Select an address and correspondng nterrupt for the parallel port.
Devce Mode
Select a devce mode for the parallel port.
Hardware Montor
Press <Enter> to enter the sub-menu.
CPU Smart Fan Target
Controls CPU fan speed automatcally dependng on the current temperature and
to keep t wth a spec󰘰c range. If the current CPU temperature reaches the target
value, the smart fan functon wll be actvated.
SYS Fan1/ SYS Fan2 Control
These tems allow users to select how percentage of speed for the SYSFAN1/
SYSFAN2.
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ SYS FAN2 Speed
These tems show the current status of all of the montored hardware devces/
components such as CPU temperature/ system temperature and the few fans’
speeds.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶