MSI Z77A-G43 GAMING

2-14
BIOS Setup
EIST
Enhanced Intel SpeedStep technology allows you to set the performance level of the
mcroprocessor whether the computer s runnng on battery or AC power. Ths 󰘰eld only
appears wth nstalled CPUs that support ths technology.
Intel Turbo Boost
Enables or dsables Intel Turbo Boost whch automatcally boosts CPU performance
above rated spec󰘰catons (when applcatons requests the hghest performance state
of the processor).
Enhanced Turbo [Dsabled]
[Enabled] All CPU cores would be ncreased to Intel maxmum turbo boost rato.
[Dsabled] Dsable ths functon.
OC Gene Functon Control
Ths tem allows you to enable/dsable the OC Gene functon.
My OC Gene [Default]
Ths tem s used to select whether OC Gene parameters are customzed by user.
[Default] OC Gene wll use default OC related parameters to overclock the
system.
[Customze] Allows user to con󰘰gure the followng related "My OC Gene opton" sub-
menu manually for OC Gene.
DRAM Reference Clock [Auto]
Ths tem appears when a CPU that supports ths adjustment s nstalled. Ths tem
allows user to set the DRAM reference clock.
DRAM Frequency
Ths tem allows you to adjust the DRAM frequency. Please note the overclockng
behavor s not guaranteed.
Adjusted DRAM Frequency
It shows the adjusted DRAM frequency. Read-only.
DRAM Tmng Mode
Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect)
EEPROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the
followng “Advanced DRAM Con󰘰guraton” sub-menu to be determned by BIOS based
on the con󰘰guratons on the SPD. Selectng [Lnk] or [Unlnk] allows users to con󰘰gure
the DRAM tmngs for each channel and the followng related “Advanced DRAM
Con󰘰guraton” sub-menu manually.
Advanced DRAM Con󰘰guraton
Press <Enter> to enter the sub-menu. Ths sub-menu wll be actvated after settng [Lnk]
or [Unlnk] n “DRAM Tmng Mode”. User can set the memory tmng for each channel
of memory. The system may become unstable or unbootable after changng memory
tmng. If t occurs, please clear the CMOS data and restore the default settngs. (Refer
to the Clear CMOS jumper/ button secton to clear the CMOS data, and enter the BIOS
to load the default settngs.)
GT OverClockng
Ths tem allows you to enable/ dsable the overclockng of ntegrated graphcs.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶