MSI Z77A-G43 GAMING - Page 59

2-15
MS-7758
Chapter 2
GT Rato
Ths settng controls the rato of ntegrated graphcs frequency to enable the ntegrated
graphcs to run at d󰘯erent frequency combnatons.
Adjusted GT Frequency
It shows the adjusted ntegrated graphcs frequency. Read-only.
Spread Spectrum
Ths functon reduces the EMI (Electromagnetc Interference) generated by modulatng
clock generator pulses.
Important
If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system
stablty and performance. But f you are plagued by EMI, select the value of Spread
Spectrum for EMI reducton.
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the
system wll become less stable. For the most sutable Spread Spectrum value, please
consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght
jtter can ntroduce a temporary boost n clock speed whch may just cause your
overclocked processor to lock up.
CPU Core Voltage/ DRAM Voltage.
These tems are used to adjust the voltages.
Current CPU Core Voltage/ Current DRAM Voltage
These tems show current voltages. Read-only.
OC Retry Count [1]
Ths tem s used to set the number of bootng tmes wth the present over-clockng
settngs. If over-clockng has faled wth the desgnated bootng tmes, the system wll
restore the defaults at next boot.
Overclockng Pro󰘰les
Press <Enter> to enter the sub-menu.
Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu.
Set Name for Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Gve a name by typng n ths tem.
Save Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Save the current overclockng settngs to ROM for selected pro󰘰le.
Load/ Clear Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Load/ Clear the stored pro󰘰le settngs from ROM.
OC Pro󰘰le Save to USB
Save the current overclockng settngs to USB 󰘱ash dsk.
OC Pro󰘰le Load from USB
Load the stored settngs from USB 󰘱ash dsk.
▶
▶
▶
•
•
•
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶