Chapter 1
1-28Getting Started
POWER1: Power Button
This button is used to turn-on and turn-o the system. Press the button once to turn-on
or turn-o the system.
RESET1: Reset Button
This reset button is used to reset the system. Press the button to reset the system.
AUD_SW1: Audio Power Switch
This switch species the power mode for back panel audio ports.
Direct Power
mode
Onboard Power mode
(Default)
Important
Before switching to “Direct Power mode”, please make sure the “Direct Audio Power
Connector” (AUDPWR1) has been connected to the power supply.
Do not use the audio power switch while the system is on because it will damage
the motherboard.
•
•