To Next PageTo Next PageWhat to do if bubble air blower does not work in mspa D-SC06 Silver Cloud?
If the bubble air blower in your MSpa Hot Tub isn't working, it could be due to bubble motor failure, in which case you should contact the MSpa Service Center. Alternatively, the system might have auto-off after 10 minutes; wait for 10 minutes and then try turning on the Bubble button again.
Why is my mspa Hot Tub in an abnormal shape?
If your MSpa Hot Tub is in an abnormal shape, it could be due to extra air pressure caused by strong sunshine. Check the air pressure and release air if necessary. During hot weather, it's recommended to check if it's necessary to release some air to avoid any possible damage to the spa pool.
General| Model | D-SC06 |
|---|---|
| Category | Hot Tub |
| Type | Inflatable |
| Seating Capacity | 6 |
| Heater | 1500W |
| Massage Air Blower | Yes |
| Filtration System | Yes |
| Temperature Range | 68°F - 104°F |
| Control System | Digital |
| Shell Material | PVC |
| Frame Material | Steel |
| Material | PVC |
Outlines essential site conditions and requirements for safe and proper spa installation, both indoor and outdoor.
Step-by-step guide on how to inflate the spa tub using the control unit and manometer for correct pressure.
Instructions on filling the spa with water, including correct levels and temperature recommendations for optimal heating and pump function.
Emphasizes the importance of keeping spa water sanitized with sanitizers and maintaining water balance for health and longevity.
Specifies the ideal pH, alkalinity, and chlorine levels for spa water and how to test them using strips.
Step-by-step instructions for draining the spa water completely, including using the bubble function to dry pipes.
Lists common causes for the control panel not displaying information, such as power failure or PRCD issues, and their solutions.
Addresses issues related to spa leaks, including connection tightness, drainage valve closure, and body damage, providing corresponding solutions.
Covers problems with the spa not heating correctly, such as incorrect temperature settings, heating element failure, or low water level.
Describes causes for the filter pump not operating, such as power failure or a clogged filter, and provides solutions.
