3. ATTACH RIDGE POLE
1. Insert red ridge pole into red grommets above doors, making sure ridge pole rests on top of both red and gray
main poles.
4 .ATTACH RAINFLY
1. Lay rainfly over tent. Attach rainfly’s midpoint grommets to ridge pole.
2. Clip and tighten all buckles at all stake loops, connecting red webbing with red stake loops, gray webbing with
gray stake loops.
3. Stretch out vestibules until taut and stake down, making sure seams align with frame.
USE TIPS:
All tents require staking; unsecured tents are susceptible to wind damage. In some conditions, additional stakes and
cord may be required. Re-adjustment of stakes and rainfly may be
necessary to keep tent tight and weatherproof. For complete care and use instructions, refer to the Owner’s Manual
(available at www.msrgear.com/Elixir2).
To Next Page
Loading...
