MSR HUBBA HUBBA NX User Manual

M OUNTAIN S AFETY R ESEARCH
®
HUBBA HUBBA
™
NX
Assembly Instructions
© 2014 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
1-800-531-9531
1-206-505-9500
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, 2 guy cords, 2 tensioners,
6 MSR
®
Mini-Groundhog™ Stakes, 1 repair sleeve
80-467-1
PREPARE FOR SETUP
ATTACH HUBBED POLES
ATTACH CLIPS
ATTACH RAINFLY
1. Attach clips to pole along length of tent and ridge pole.
1. Spread tent out and stake out four corners tightly.
2. Assemble poles.
1. Insert tips of two hubbed poles into grommets at one end of tent
floor, followed by the remaining two at the other.
2. Insert short ridge pole into two grommets at midpoint of tent
ceiling.
1. Lay rainfly over tent, aligning red webbing to red stake loops,
gray webbing to gray stake loops. Attach the rainfly’s midpoint
grommets to ridge pole.
2. Stretch out vestibules until taut and stake down, making sure
seams align with frame.
USE TIPS: All tents require staking; unsecured tents are susceptible to
wind damage. In some conditions, additional stakes and cord may
be required. Readjustment of stakes and rainfly may be necessary
to keep tent tight and weatherproof. A footprint can help keep your
tent clean, dry and protected from abrasion. Following these tips will
prolong the life of your tent. MSR
®
offers a full line of accessories to
secure, maintain and enhance your tent.
Please follow these instructions to guide you through assembly only.
For complete instructions on the recommended care and use of your tent,
please refer to Owner’s Manual at www.msrgear.com/tents/ownersmanual
For German, French, Spanish, Italian, Dutch and Japanese instructions go to www.msrgear.com/tents/ownersmanual
Watch video setup instructions, including Fast & Light
®
options,
at www.msrgear.com/HubbaHubba

MSR HUBBA HUBBA NX Specifications

General

Capacity	2
Number of Doors	2
Number of Poles	2
Pole Material	Aluminum
Canopy Fabric	20D ripstop nylon
Freestanding	Yes
Peak Height (inches)	39
Vestibule Area (sq ft)	17.5
Design Type	Freestanding
Floor Dimensions	84 x 50 in / 213 x 127 cm
Floor Area	29 sq ft / 2.7 sq m
Rainfly Fabric	20D ripstop nylon 1200mm
Floor Fabric	30D ripstop nylon 3000mm Durashield polyurethane & DWR
Packed Size	18 x 6 in / 46 x 15 cm
Vestibule Area	17.5 (8.75 x 2) sq ft / 1.6 (0.8 x 2) sq m
Peak Height	39 inches (99 cm)

Summary

Standard Tent Assembly

Prepare for Setup

Spread tent out and stake four corners, then assemble poles.

Attach Hubbed Poles

Insert hubbed poles into tent floor grommets and ridge pole into ceiling grommets.

Attach Clips

Attach clips to the tent and ridge poles along their length.

Attach Rainfly

Lay rainfly over tent, align webbing, attach grommets, and stake vestibules taut.

Fast & Light Setup with Footprint

Prepare for Setup and Attach Poles

Stake out footprint and insert poles into corner grommets to create pole structure.

Secure Rainfly

Attach rainfly webbing to pole tips and insert ridge pole into vestibule door grommets.

Secure Tent

Stake out tent vestibules and guy out as necessary for stability.

Fast & Light Setup with Rainfly Only

Prepare for Setup

Assemble poles and lay the rainfly flat on the ground.

Attach Poles

Insert pole tips into rainfly bottom grommets and ridge pole into ceiling grommets.

Secure Tent

Stake out corners, tension straps, and secure vestibules and guy lines.