User Guide
11
Soft Key 2 (SK2): This key is located just below the display area and just
above the END key. Its label is shown directly above it in the display area.
Here is a summary of SK2 functionality:
GROUP – provides access to a list of all downloaded talk group tag
positions that the user can select from.
SELECT – enables you to select desired talk group tag positions and
various other functions and features.
OK – confirms selection of certain functions and features.
STORE – confirms selection of functions that store information in
the radio such as commissioning info, talk group tag labels, GPS
positions and various codes (lock code, password, etc.).
EDIT – used to inform the radio that you are about to enter
alpha/numeric keys (for TG label, GPS Position Name, etc.).
YES – only appears when you initiate a manual beam cross-over,
initiate the commissioning process, or change the serial port
configuration.
SAVE – used to save entered data such as a talk group label or save a
GPS position to memory.
Soft Key 3 (SK3)
: This is the UP ARROW key. Here is a summary of SK3
functionality:
LOCK – only appears in Dispatch mode when radio is idle. Used to
lock the radio to the current talk group.
UNLOCK – only appears in Dispatch mode when radio is idle. Used
to remove a talk group lock.
EMG – only appears when the system lock prompt appears.
Emergency circuit switched voice calls are not supported in
the current radio.
Soft Key 4 (SK4)
: This is the DOWN ARROW key. As a soft key, SK4 is
used to scroll down various menu items and lists, scroll through downloaded
talk group tag positions, and decrease volume levels.
To Next Page
Loading...
