EasyManua.ls Logo

MT Evolution User Manual

MT Evolution
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cordless Rotary Tattoo Machine Evolution
Congratulations on your purchase of MT Mustang Tattoo equipment!
The experience of our engineers and continuous testing by masters during the development phase allows to
achieve the perfect balance of accuracy, ergonomics and high quality.
Read this manual carefully before using!
Here is Evolution, the first Russian battery-powered tattoo machine of the new generation.
Feautures:
This machine has only one pair of friction. It is made of graphite and antifriction polymer. There are
no springs. Thanks to this design, the machine has the lowest possible friction and heating losses,
spending maximum battery energy to perform useful work.
• Comes with a magnetic stand with a pause function that does not require power.
• Uses several types of batteries: the most common universal type 18650, and type 18350, designed to
minimize the total weight.
• Has modes of indication of charge, voltage and current amperage.
• Possesses non-volatile memory of indication mode and settings in memory cells.
• Fine tuning of voltage in 0.1 volt steps.
• Function of smooth change of engine speed when switching on / off and changing the memory cell.
• Connector for auxiliary charging, which is active both in the off mode and during operation.
• All body parts are made from high strength aircraft alloy B-95.
• Works with disposable Cheyenne D-GRIPS holders.
Holder position lock.
• Extended range of an optimum operating voltage.
• Universal purpose (Contour, shading, shadows).
Contents of delivery:
Evolution machine. Magnetic stand with pause function. Battery charging station for 2 slots. USB to
Micro USB cable for charging station. Battery type 18650. Battery type 18350. Battery isolation
holder. Original MT Wire USB Type-A to USB Type-C for charging the machine directly. Spare
position locker. Spare O-ring. Warranty card.
Question and Answer IconNeed help?

Do you have a question about the MT Evolution and is the answer not in the manual?

MT Evolution Specifications

General IconGeneral
BrandMT
ModelEvolution
CategoryPiercing and Tattoo Supplies
LanguageEnglish

Summary

Work

Before Use

Prepare the machine by inserting the battery and checking the motor sound.

Magnetic Stand with Pause Function

Explains the automatic standby function of the magnetic stand for pausing operation.

Machine Operation

Details how to switch the machine on/off, change display modes, and adjust voltage.

Machine Display Modes

Describes the different display modes for voltage, battery charge, and current amperage.

Charging and Accumulator

Accumulator Type

Specifies compatible battery types (18650 and 18350) for the machine.

Display Indications

Explains display indicators for battery charge, low battery, and full charge.

Charging Methods

Details charging the battery via the station or directly from the machine.

Using Small Accumulator

Discusses using smaller batteries for weight balance and hand fatigue.