EasyManua.ls Logo

MTD 21AA413B700 User Manual

MTD 21AA413B700
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
Rear Tine Tiller
Model Series
410 Thru 420
Model Series 410 Shown
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A. FORM NO. 770-10136D
(10/03)
Question and Answer IconNeed help?

Do you have a question about the MTD 21AA413B700 and is the answer not in the manual?

MTD 21AA413B700 Specifications

General IconGeneral
BrandMTD
Model21AA413B700
CategoryTiller
LanguageEnglish

Summary

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

Your Responsibility

Operator's duties and adherence to warnings and instructions for safe tiller operation.

SECTION 2: ASSEMBLING YOUR TILLER

Attaching Depth Stake

Step-by-step guide for securely attaching the depth stake assembly.

Final Clutch Adjustment

Steps for performing the final clutch adjustment for optimal performance.

SECTION 4: OPERATING YOUR TILLER

Before Starting Operations

Essential steps before operating the tiller, including fuel and oil checks.

Starting and Stopping the Engine

Procedures for safely starting and stopping the tiller's engine.

Setting Tilling Depth

Instructions for adjusting the depth stake to control tilling depth.

Operating the Tiller

Guidance on selecting depth, starting engine, and engaging drive mechanisms.

SECTION 6: MAINTAINING YOUR TILLER

Engine Maintenance

Guidelines for engine oil, air cleaner, and spark plug maintenance.

SECTION 7: TROUBLE SHOOTING GUIDE

Engine Issues

Troubleshooting steps for engine starting and erratic running problems.

Tine and Wheel Engagement

Troubleshooting for issues with tines or wheels not engaging properly.

MANUFACTURER'S LIMITED WARRANTY