• Place the hooks of the grass catcher into the slots
in the handle bracket assembly on each side of the
lower handle as shown in Figure 8. Release the
rear discharge door.
To remove the grass catcher, lift the rear discharge
door on the mower. Lift the grass catcher up, out of the
slots in the handle bracket assemblies. Release the
rear discharge door.
WARNING: Do not operate this mower with the
chute door open, unless the complete grass
catcher is properly mounted on the mower.
Grass Catcher Bag
Figure 8
Rear Discharge Door
H_ook Handle
Bracket
SECTION5: KNOWYOURLAWNMOWER
Cord Restraint
Handle Insulator
Handle Insulator
Grass Catcher
Rear Discharge Doo
Lower Handle
Electric Motor
iS
Rear Trailing Shield
Read this operator's manual and safety rules before
operating your lawn mower. Compare the illustration in
Figure 9 with your lawn mower to familiarize yourself
with the location of various controls and adjustments.
Save this manual for future reference.
WARNING: The operation of any lawn mower
can result in foreign objects being thrown into the
eyes, which can damage your eyes severely.
Always wear safety glasses while operating the
mower, or while performing any adjustments or
repairs.
Motor/BladeControlAssembly
The motor/blade control is located on the upper handle
of the mower. See Figure 9. The motor/blade control
handle engages and disengages the motor and blade.
Figure 9
Height Adjustment Lever
WARNING: The motor / blade control assembly
is a safety device. Never attempt to bypass its
operations.
RearTrailingShield
The rear trailing shield, attached between the rear
wheels of your mower, is provided to minimize the
possibility of objects being thrown at the operator from
the rear of the mower. See Figure 9.
CircuitBreaker
The mower isequipped with a circuit breaker, located
on the motor/blade control. Refer to Figure 10. This
circuit breaker may trip when too much strain is placed
on the mower. See Making Adjustments Section.
To Next Page
Loading...
Need help?
General
