MTD 463 User Manual

OPERATOR'S MANUAI
Chipper Shredder
Model Series
462 thru 465
Model 465 Shown
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
Inthe State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A. FORM NO. 770-10048E
(5/02)

MTD 463 Specifications

General

Brand	MTD
Model	463
Category	Chippers/Shredders
Language	English

Summary

Finding Model Number

Locate Model Plate Information

Guide to finding model and serial numbers on the equipment's plate.

Record Model and Serial Numbers

Instructions to copy model and serial numbers for future reference.

Calling Customer Support

Contacting Customer Support

Important Safe Operation Practices

Operator Training Requirements

Pre-Operation Preparation and Safety Checks

Safe Operation Procedures

Key rules and precautions for safe machine operation.

Maintenance and Storage Safety

Assembling Your Chipper Shredder

Unpacking and Initial Setup

Attaching Major Components

Operating Your Chipper Shredder

Fueling and Oil Check

Starting the Engine

Step-by-step guide for starting the chipper shredder engine.

Shredding and Chipping Material

Guidelines on what materials to shred/chip and how to use the chutes.

Maintaining Your Chipper Shredder

Lubrication and General Maintenance

Flail Screen Maintenance

Blade Maintenance

Procedures for sharpening or replacing chipper and shredder blades.

Troubleshooting

Common Problems and Solutions

Lists common issues like engine not starting, erratic running, and their remedies.