Need help?Do you have a question about the MTD Tiller and is the answer not in the manual?
Machine intended for specific garden tasks; use according to specifications only.
Read instructions, handle safely, keep area clear, wear gear, refuel cautiously.
Stops the machine when released by the operator.
Prevents objects like stones from being thrown out.
Identifies safety and warning indicators represented by symbols or pictograms.
Read operating instructions carefully before putting appliance into operation.
Keep hands and feet well away from rotating parts.
Explains symbols used for hazards and important information.
Check contents, fill with engine oil, set hoeing depth and bar.
Set guiding bar height and hoeing width (Type 1 only).
Fill up with petrol and check oil level before operating.
Start engine outdoors, ensure firm footing, connect spark plug terminal.
Set throttle lever to STOP and turn off the petrol tap.
Work carefully, avoid hazards, adjust depth for effective hoeing or cultivation.
Release the clutch lever and set the throttle lever to STOP.
Maneuver for short distances and secure for safe vehicle transport.
Follow maintenance plan, check safety devices, lubricate moving parts.
Refer to the engine manufacturer's instructions for engine maintenance.
Clean filters, plugs, assembly; replace parts as required.
Check clutch, carburettor; sharpen or replace hoeing assembly.
Wear gloves, avoid high-pressure media, clean after each use.
Empty fuel, clean, protect from rust, store in a clean, dry room.
Guarantee conditions apply; contact vendor or branch for claims.
Engine manufacturer is liable for engine-related issues.
Addresses fuel, choke, spark plug, and primer issues for starting.
Solutions for sputtering engine due to choke or spark plug problems.
Fixes for earth clods, loose parts, or clutch issues affecting hoeing.
Tighten loose screws/bolts, check hoeing assembly for vibration.
To Next Page
General