MTD Yard-Man 247.270190 User Manual

YaRD-MaN.)//
Operator's Manual
Riding Mower
Internal Bagging System
27.5" Cutting Deck
Model 247.270190
Factory No. 13A-328-402
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws, Federal laws apply on federal lands, A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, FtO. Box 368022 Cleveland, Ohio 44136-9722,
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U,S.A. FORM NO, 770-10201A
(11/99)

MTD Yard-Man 247.270190 Specifications

General

Brand	MTD
Model	Yard-Man 247.270190
Category	Lawn Mower
Language	English

Summary

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

General Operations and Slope Safety

Safety rules for operating the mower, including general use and on slopes.

Child Safety and Maintenance Precautions

Safety guidelines related to children and during maintenance procedures.

Component Safety and Disposal Protocols

Safety for specific components and proper disposal of fluids and materials.

SECTION 2: SLOPE GUAGE

SECTION 3: UNPACKING & ASSEMBLING YOUR RIDER MOWER

Unpacking and Initial Assembly Steps

Procedures for unpacking the mower and attaching battery cables and chute.

Attaching the Mulching Plug

Instructions for attaching the mulching plug to the mower.

SECTION 4: KNOW YOUR RIDER MOWER

Controls and Adjustments Overview

Identification and function of key controls like throttle, pedals, and levers.

Operating Controls and Safety Systems

Details on brake, shift lever, cutting height, and safety interlock system.

SECTION 5: OPERATING YOUR RIDER MOWER

Starting, Stopping, and Basic Operation

Steps for starting the engine, operating controls, and stopping the mower.

Mowing Techniques and Grass Catcher Use

Guidelines for mowing, emptying the grass catcher, and using the mulching plug.

SECTION 6: MAKING ADJUSTMENTS

Adjusting Pedals and Cutting Height

Procedures for adjusting the brake pedal, "Go" pedal, and cutting height.

Seat, Blade, Wheel, and Deck Adjustments

Adjusting seat position, blade brake, wheel alignment, and deck pitch.

SECTION 7: SERVICING YOUR RIDER MOWER

Belt Replacement Procedures

Instructions for replacing drive belts and the deck belt.

Variable Speed Belts and Fuse Replacement

Replacing variable speed belts and the fuse.

SECTION 8: MAINTAINING YOUR RIDER MOWER

General Maintenance and Blade Care

General recommendations, blade removal, sharpening, and oil drain.

Lubrication and Cleaning Procedures

Lubrication points, engine cleaning, and fuel filter information.

SECTION 9: OFF-SEASON STORAGE

Storing the Rider Mower, Battery, and Engine

Guidelines for storing the mower, battery, and engine during off-season periods.

SECTION 10: TROUBLE-SHOOTING

Common Operational Issues and Solutions

Troubleshooting for vibration, grass discharge, belt problems, and engine start issues.

Engine Starting and Smoking Problems

Solutions for engine crank but no start, and engine smoking issues.

SECTION 11: PARTS LIST FOR MODEL 328

Steering Components Parts List

List of parts for the steering wheel and steering column assemblies.

MANUFACTURER'S LIMITED WARRANTY