What to do if MTU 10V1600Ax0 has coolant leaks at intercooler?
If you observe coolant leaks at the intercooler of your MTU Engine, and there's a major coolant discharge, it indicates that the intercooler is likely leaky. In this case, contact Service.
General| Engine Type | Diesel |
|---|---|
| Configuration | V10 |
| Fuel Type | Diesel |
| Cooling System | Water-cooled |
| Emission Standards | EU Stage IIIA |
Key guidelines for safe operation and product use.
Rules for personnel qualifications, training, and PPE.
Procedures for safe engine startup, operation, and emergency stops.
Safety measures before, during, and after maintenance.
Guidelines for fire safety, environmental protection, and material handling.
Explanation of safety notice symbols and their meanings.
Procedures and precautions for transporting the engine safely.
Guidelines and safety measures for lifting the engine.
Explanation of engine nomenclature and cylinder numbering.
Diagram and identification of major engine components.
Identification and description of key sensors and actuators on the engine.
Technical specifications for 10V1600A60/A70 models.
Technical specifications for 10V1600C60/C70 models.
Technical specifications for compliant 10V1600C60/C70 models.
Technical specifications for 12V1600A50/A60/A70 models.
Technical specifications for 12V1600C50/C60/C70 models.
Technical specifications for compliant 12V1600C50/C60/C70 models.
Specifies the sequence of cylinder firing.
Provides physical dimensions of the engine.
Steps for restarting the engine after normal downtime.
Procedures for restarting after prolonged storage.
Detailed steps for safely starting the engine.
Essential checks to perform during engine operation.
Procedures for safely shutting down the engine.
Post-shutdown procedures and checks.
Instructions for cleaning the engine and related systems.
A table linking maintenance tasks to their procedures.
Guidance for diagnosing and resolving engine issues.
Interpretation and resolution of ECU fault codes.
General engine tasks, including barring and test runs.
Information on valve clearance checks and cylinder head cover procedures.
Procedures for venting the fuel system.
Information and replacement procedures for fuel filters.
Instructions for replacing the air filter.
Details on checking the air intake service indicator.
Procedures for checking and changing engine oil.
Maintenance of oil filtration and cooling components.
Procedures for checking, changing, draining, and filling engine coolant.
Information on checking, changing, and draining charge-air coolant.
Instructions for replacing the drive belt.
Procedures for drive belt and component replacement.
Information on checking coupling radial/axial play.
Procedure for checking engine cabling and connections.
Cleaning governor, connectors, and replacing sensors.
List of abbreviations used in the manual.
Contact information for support and service.
List of special tools required for maintenance.
Alphabetical index for quick reference.
To Next Page
