MTX MXA4001 - Features; Specifications

FEATURES
• Patented state-of-the-art power supply
• Patent-pending, Class D technology for high efficiency and
interference-free operation
• High mass extruded aluminum heatsink for maximum thermal management and
bulletproof reliability
• Adjustable LP Crossover - Variable from 40Hz-200Hz for maximum system
design flexibility
• Fully adjustable Bass Boost - 40Hz, 0-18dB to enhance the low frequency
experience in your vehicle
• Remote Subwoofer Level Control included allows you to fine tune the bass from
the driver’s position
• Defeatable Subsonic Filter at 30 Hz for improved efficiency and sonic
performance
• High Level Input with patented Smart Engage Auto Turn-on for easy installation
with factory radios
• CEA 2006 Compliant. All power ratings are not created equal. CEA 2006
Compliance ensures that the power of this amplifier is measured according to
strict standards dictated by the Consumer Electronics Association.
SPECIFICATIONS
2
RMS per channel
@ 4Ω (≤ 1%
THD+N)
150 Watts 200 Watts 300 Watts 400 Watts
RMS per channel
@ 2Ω (≤ 1%
THD+N)
300 Watts 400 Watts 600 Watts 800 Watts
Signal to Noise
Ratio
75 dBA 75 dBA 75 dBA 75 dBA
Frequency
Response
20Hz to 200Hz
(-3dB)
20Hz to 200Hz
(-3dB)
20Hz to 200Hz
(-3dB)
20Hz to 200Hz
(-3dB)
Maximum Input
Signal
5V 5V 5V 5V
Maximum
Sensitivity
100mV 100mV 100mV 100mV
THD+N
(Distortion)
<0.25%
(reference:1W
output)
<0.25%
(reference:1W
output)
<0.25%
(reference:1W
output)
<0.25%
(reference:1W
output)
MXA3001 MXA4001 MXA6001 MXA8001