MTX Thunder TA5601 User Manual

TA5601 Owner’s Manual
Introduction
Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX amplifiers and
matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to
hear, feel, and experience all of the music the artist intended.
Specifications
Primary Ratings:
Power Output: 300 watts RMS x 1-channel at 4 ohm and ≤ 1% THD+N
Signal-to-Noise Ratio (1 watt): 70dB
Secondary Ratings
Power Output: 600 watts RMS x 1-channel at 2 ohm and ≤ 1% THD+N
THD+Noise (Distortion) (1 watt): ≤ .5%
Frequency Response (-3dB): 20Hz-200Hz
Maximum Input Signal: 10V
Maximum Sensitivity: 100mV
Dimensions: 9-5/8” x 16-11/16” x 2-1/2” (245mm x 425mm x 65mm)
Patented Smart Engage™ Auto-Turn-On (Patent No: US06556683)
Patented Adaptive Class D Technology (Patent No: US06753729)
Patented Power Supply (US05598325)
Input Sensitivity Switch: 100mV-1V/1V-10V
Crossover: Low @ 40Hz-200Hz, 24dB
Subsonic @ 30Hz, 12dB/oct, Defeat
Quasi Parametric Boost/Cut: +/-12dB, Freq. 30Hz-80Hz
Remote Subwoofer Level Control
Features
1. Prizm EFX – All MTX amplifiers include backlit adjustment controls on the top surface of the product.
• Color – The backlit controls offer unlimited colors on the display -- from RED, GREEN, and BLUE to any
color in between.
• EFX – You can switch Prizm EFX lighting to “pulsate” with the beat of the music.
2. Xtant Technology Cooling (XTC) – A thermal-regulated turbo-charged intercooler supplies fan forced cool air
evenly and constantly through tightly packed bonded fins. Fan speed is continuously varying and controlled
by the amplifier’s output, temperature of heatsink and transformers. Exhaust from the internal heatsink is
strategically positioned to cool the transformers to maintain maximum performance at all volumes.
3. Bi-Level Inputs with Smart Engage™ – All MTX amplifiers feature RCA type input connections.
• Low Level Input –Source units with an output signal level of 100mV–10V may be used. See “Input
Sensitivity” for proper voltage level setting.
• High Level Inputs with Smart Engage™ – All MTX amplifiers allow high level inputs through RCA type
input connections using provided high level adapters. Source units with an output signal level of 100mV–10V
may be used. See “Input Sensitivity” for proper voltage level setting.
• Smart-Engage™ Auto-Turn-On - An auto-turn-on circuit is included within the amplifier. A remote turn-
on wire is not necessary when connecting the amplifier’s high level input to a high-powered source unit (car
stereo). The amplifier will automatically turn on when music is received through this type of connection.
4. Input Sensitivity – The Input Sensitivity is used to set the proper input voltage range:
X1 POSITION: 100mV–1V (Typically for RCA Input)
X10 POSITION: 1V–10V (Typically for Speaker Level Input)

MTX Thunder TA5601 Specifications

General

Brand	MTX
Model	Thunder TA5601
Category	Car Amplifier
Language	English

Summary

Introduction to MTX Thunder TA5601

Specifications and Features

Primary and Secondary Ratings

Details power output, signal-to-noise ratio, THD+Noise, frequency response, and input signal limits.

Physical Dimensions

Specifies the external size of the amplifier unit in inches and millimeters.

Key Features and Technologies

Highlights Prizm EFX lighting, Xtant Technology Cooling, Bi-Level Inputs, and Smart Engage™™.

Input Sensitivity Adjustment

Explains how to set the input sensitivity range for different source units.

Crossover and Filter Controls

Describes the Low-Pass Crossover, Subsonic Filter, and Quasi Parametric Equalizer controls.

Installation and Connections

Before Starting Installation

Lists required tools and emphasizes safety precautions before beginning installation.

Mounting the Amplifier

Provides instructions for selecting a mounting location and preparing it for installation.

Wiring Connections

Details on connecting Bi-Level Inputs, Speaker Wires, and Power Terminals (+12V, GND, REM).

Feature Setup and Adjustments

Setting Input Sensitivity Range

Guidance on selecting the correct input sensitivity setting for optimal performance.

Adjusting Gain Control

Procedure for setting the amplifier's gain to prevent distortion and match source unit output.

Using Crossover and Filters

Instructions for adjusting the Low-Pass Crossover and Subsonic Filter for desired sound.

Quasi Parametric Equalizer Setup

Steps for adjusting bass frequencies using the Quasi Parametric Equalizer for optimal response.

Prizm EFX Lighting

How to select colors and enable pulsating effects for the amplifier's lighting.

Troubleshooting Guide

Common Problems and Solutions

Lists common issues like no LED indication, no output, distorted sound, and blowing fuses, with solutions.