Need help?Do you have a question about the MTX TR100.4 and is the answer not in the manual?
Details power output (RMS watts at ohms), crossover points, signal-to-noise ratio, THD+N, and frequency response.
Explains how to match amplifier input sensitivity to the source unit and adjust for optimal performance without distortion.
Details the LP, HP, and Off positions of the crossover switch for subwoofer or speaker applications.
Describes the PowerOn/Protection LED and the RCA/high-level inputs for signal connection.
Covers the main (+12V) power input, ground connection, and the remote turn-on terminal.
Explains how to connect speakers, observe polarity, and use bridge mode for increased power.
Advises on fuse rating and replacement to prevent damage or performance issues.
Recommends selecting a mounting place with sufficient airflow for proper amplifier cooling.
Details connecting the positive power cable and ground wire, including fuse placement.
Explains how to connect RCA or speaker-level signal cables to the amplifier.
Guides on connecting speakers to the amplifier's output terminals using appropriate gauge wire.
Emphasizes double-checking all wiring and connections before reconnecting the battery and powering on.
To Next Page
General