Mud Buddy HD series User Manual

Mud Buddy
HD Models
Owner’s Manual
Update June 28, 2007
Thank you for purchasing the most advanced
mud motor in the world.
Assembly - Read the quick-start guide and the instructions
inside before installing and operating your motor. Check the crate
and engine for damage. Call Mud Buddy and the shipping
company immediately if you find any damage or missing items.
Notice: Your engine is shipped without oil. Fill before starting.
Check the oil with the engine in a level position. Some oil may be
left in the engine when shipped. Check while filling. Do not overfill.
Use a good grade of SAE 10W-30 oil. You can also use a synthetic oil.
For Engines
Vanguard 29, 31, and 35 takes up to 80 oz.
14 -29 horse take up to 2 qt.
Mini HD Lite Notice
Your engine is equipped with a mercury safety switch which prevents the engine from being started
unless the propeller is raised out of the water.
Kawasaki Notice
Kawasaki 29 EFI Notice: Fuel injection system. When new or when in storage for an extended
period, bleed the fuel line of air. Remove the fuel line above the fuel filter, turn the key on and
pump out 1/4 cup of fuel into a suitable container. Reassemble. The fuel filter may have a little air
inside, this is okay. If you run out of fuel, the above procedure must be repeated.

Mud Buddy HD series Specifications

General

Brand	Mud Buddy
Model	HD series
Category	Engine
Language	English

Summary

Engine Warranty

Covered Engine Manufacturers

Lists engine manufacturers covered by warranty for specific models. Covers 14-35 HP engines.

Modified Engine Warranty

Frame Warranty Service

Details warranty service for the drive/frame components, distinct from engine service.

Safety and Cautions

Operation and Break-In

Prepare the Engine for Starting

Instructions on initial engine preparation before starting, including reading manuals and break-in precautions.

Starting the Engine

Steps and safety checks for starting the Mud Buddy engine and engaging the drive.

Steering and Maneuvering

Guidance on controlling the boat's direction and using tilt/trim for optimal performance.

Service

Initial Maintenance Intervals

Outlines required service tasks at the first 10 and 50 hours of operation, including greasing and belt checks.

Maintenance Schedule

Every 100 Hours Lubrication

Details lubrication procedures for the drive assembly and swivel points every 100 hours or two years.

Throttle Cable Lubrication

Instructions for lubricating the throttle cable to prevent freezing and ensure smooth operation in cold weather.

Engine Oil and Filter

Recommendations for changing engine oil and filter, especially at the end of the season, to prevent corrosion.

Salt Water Use Procedures

Procedures for washing down the drive and engine after salt water use to prevent corrosion.

Frame Cleaning and Repair

Guidelines for cleaning the frame and repairing chips or corrosion using automotive paint.

Storage Procedures

Steps for preparing the engine and fuel system for storage to prevent damage and ensure easy restart.

Propeller Balance

Belt Tension

Belt Replacement Procedure

Winter Driving Tips

Throttle Adjustment