IMPORTANT SAFETY INSTUCTIONS | 3
– Inspect the power cable before each use. Never use
the product with a damaged power cable or if it was
dropped or damaged in any other way or if it does
not work properly. Do not try to repair the defective
product yourself because it can lead to electric
shock. Any repair that was done incorrectly can
cause hazardous situations for the user.
– If the power cable or plug is damaged, the product
should be returned to the manufacturer, its service
agents, or similarly qualified persons.
– This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug should fit in a polarized outlet
only one way. If the plug does not fully fit in the
outlet, reverse the plug. If it still does not fit, contact
aqualified electrician. Do not modify the plug in
any way. Do not let cord hang over edge of table or
counter or touch hot surfaces.
– To provide additional protection, it is recommended
to install Residual Current Device (RCD) in the power
circuit, with residual current rating not more than
30mA. Contact a professional electrician in this
matter.
– Never expose the product to direct sunlight or rain,
etc. Never use the product in humid conditions.
– Never put the product on or close to the hot or
warm surfaces or the kitchen appliances like the
electric oven or gas burner. Never use the product
close to combustibles.
– Do not wash the body of the Grinder under running
water or immerse it in water.
– Do not operate the Grinder with an empty Grinding
Hopper or tank. Add coffee beans before use. Do not
overfill the Grinding Hopper or tank.
– This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge unless they have been given supervision
and instruction concerning use of the appliance by
aperson responsible for their safety.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
