2 | IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock, and/or injury to persons.
– Read all instructions thoroughly before use.
– Do not use the appliance for anything other than
its intended use.
– This appliance is only to be used indoors.
– Check Grinding Hopper for presence of foreign
objects before using.
– Avoid contacting moving parts. Do not remove the
transparent window Lid while the grinder blades are
in motion.
– During grinding, if the coffee stops spinning, shake
the Grinder while holding the Lid closed.
– Inspect blade and blade assembly before and after
use. If damaged, do not use and contact Manufacturer
orauthorized repair facility for assistance.
– Do not grind more than 2.12 oz (60 g) of coffee. Before
grinding the next batch of coffee, wait 30 minutes to
cool down the mill.
– The applicable voltage is AC 120 V, 60 Hz. For safety
reasons, it is not appropriate to connect multiple
devices to one power outlet.
– Never leave the product connected to the power
source without supervision. Even when use is
interrupted for a short time, or when it is left
unattended, remove plug from outlet. To unplug,
grasp the plug and pull from the outlet. Never pull
from the Power Cord.
– Always disconnect the appliance from the power supply
before assembling, disassembling, or cleaning it.
Do not immerse the unit in water. To protect
against electrical shock, do not put any parts
in water or other liquid.
CAUTION!
To Next Page
Loading...
