EASY STEPS | 5
Plug in
then
remove
the Lid.
Put coffee
beans inside the
Grinding Hopper.
Do not fill above
the rim.
NOTE: Grinder
capacity: up to
2.12 oz (60 g).
Close
the Lid.
Unplug. Next, invert the Grinder
and gently tap grounds into the
Lid. Carefully remove the Lid
(with Grinder still upside down).
Pour the ground powder from
the Lid into your coffee filter.
Do not operate the
appliance for more than
20 seconds at a time.Let
the appliance cool down
for 30 minutes before
resuming operation.
CAUTION!
STEP 1 STEP 2
STEP 3
STEP 5
To operate, press and hold the
On/Off button for up to 20
seconds. Release when done.
STEP 4
NOTE: Change
grinding time to
adjust grounds
(coarse to fine). See
next page for more.
NOTE: You can
stop grinding any
time by releasing
pressure on the
On/Off button.
EASY STEPS
20
SEC
30
MIN
To Next Page
Loading...
