Need help?Do you have a question about the MullToa BioLet 55 and is the answer not in the manual?
Guide to installing the ventilation pipe, including insulation, sealing, and roof flashing requirements.
Ensuring optimal room temperature for toilet operation and protection against freezing during periods of non-use.
Instructions for proper ventilation via an external wall vent to prevent odors and ensure airflow.
Initial setup steps including adding humus starter, connecting power, and setting the heating control.
Procedure for bringing the toilet back into operation after short or long breaks.
Adjusting the toilet's capacity and heating settings based on load and liquid level.
Guidance on how often to empty the compost tray based on usage and compost level.
Recommendations for adding humus starter to maintain compost texture and moisture.
Description of the automatic mixing process and adding humus for extra guests.
Detailed steps for emptying the compost tray, including handling liquid and cleaning.
Instructions for managing the toilet when away for short periods.
Procedure for preparing the toilet for winter storage or seasonal closure.
Diagnosing and rectifying issues with dry compost, including adjusting settings and adding water.
Addressing problems with wet compost, including adding humus and managing liquid levels.
Troubleshooting excessive liquid in the level tubes, including drainage and heat adjustments.
Identifying causes and solutions for bad odors, focusing on proper installation and airflow.
Diagnosing issues with the mixer motor, including shear pin breaks and overheating protection.
Step-by-step guide for replacing the shear pin on the mixer motor.
Guidance on when professional electrical assistance is required for the toilet.
List of items that should not be disposed of in the compost toilet.
Information on how to obtain spare parts and necessary details to provide.
To Next Page
General
