How BioLet works 2
Your BioLet package 3
Installationpackage 3
Parts 3
Crosssektion - parts 3
Installation Tools 4
Temperature 4
Air supply 4
Pipe Installation 4
Starting the toilet 5
Maintenence 6
Liquid level 8
Temperature 8
Mixing 8
Empty tray 8
Time to empty 8
End of season 9
Start up season 9
Prepare brief abesense 9
End of (season) use 9
Start of (season) use FAQ 9
Compost too dry
10-11
Compost too wet 10
Insects 10
Bad odour
10
Replacing shear pin 1
1
Spare parts and service 11
Installation- and user manual for
BioLet
®
55ai och 65ai
How the Biolet works
Biolet is a selfcontained biological toilet that composts waste, toiletpaper and evaporates liquid.
The composting process takes place using nature's own microorganisms, without the need of any chemicals.
The toilet should be used as an ordinary toilet. Controlled air supply and heat, as well as regular mixing of the
compost accelerates the composting process and converts toilet waste into eco-friendly humus.This makes a
nutrient rich supplement for your garden.
Please read the instructions before beginning to install your Biolet toilet. Experience has shown that
problem that might occur are almost all related to installation or maintenance.
IMPORTANT THINGS TO REMEMBER:
– When the toilet is used, room temperature should be at least + 18° C (65° F).
– lf you are away for more than two days, turn the power off and put the cover in the seat opening,
Before start using the toilet after a standstill, you should always mix the compost with the supplied rake.
– The heating element in the room can be switched off, the composting toilet will not be damaged by
freezing.
– The disposal of items such as sanitary towels, tampons, cigarette butts, burning or glowing objects should
not be put into the toilet.
CONTENTS
2
To Next Page
