To Next PageTo Next Page
Need help?Do you have a question about the Multi Nautic QP-427 and is the answer not in the manual?
General| Brand | Multi Nautic |
|---|---|
| Model | QP-427 |
| Category | Docking Station |
| Language | English |
Lists the aluminum parts required for building the dock frame.
Details the parts needed for attaching the dock to its supports.
Lists all essential tools necessary for assembling the dock kit.
Procedure for attaching the center piece to the side beams using bolts.
Instructions for inserting and securing end pieces with leg holders.
Guidance on installing posts and junction plates at the dock ends.
Instructions for cutting decking boards to size, including corner preparation.
Guidance on positioning the frame and checking its squareness for decking.
Steps for assembling decking panels and securing supports with proper spacing.
Details on using junction plates for straight line dock installations.
Instructions for installing corner adapters for L-shaped dock configurations.
Guidance on using parallel adapters to create dock platforms.
How to insert posts into leg holders and adjust height in water.
Procedure for attaching base plates to posts at the correct depth.
Adjusting platform height and leveling, then tightening bolts.
Options for dock ladders including material, style, and load capacity.
Additional parts like braces, posts, base plates, and dock wheels.
Accessories for mooring, such as vertical bumpers and cleats.
Items for leisure use and safety, including racks and ramps.
