Multiplex FreshBlender - Safety Notices and Precautions; Warning and Caution Statements; Important Procedural Information

2 of 3
DocumentNumber:020008727 April14,2021
Subject:FreshBlenderCasterBrakeRetrofit
11.Gentlyreleasepressurefromleveruntilunitrestson
three(3)boardstack.Removeandsetasideleverand
fulcrumboards.Closelowerrefrigerationdoor.
12.Testunitforstability.
13.Removeoldhardware.
A. Placewrenchoncasterboltandplacesocketon
casternut.
B. Turnsockettoremovenutwhileusingwrenchto
holdbolt.Removebolt,nutandwheel.
INSTALL NEW BRAKE
14.PlaceWaveWasherontoBolt.
PlaceBrakeBracketoverwheelfork.VerifytabonBrake
Bracketisinsertedintoslotonwheelfork.
15.PlaceBrakePedalontoBrakeBracket.
16.Insertoldcasterwheelbetweenforksandpressboltinto
assemblyasshownbelow.