Need help?Do you have a question about the Multiplex ROXXY MSB 45A and is the answer not in the manual?
General| Continuous Current | 45A |
|---|---|
| Input Voltage | 2-6S LiPo |
| BEC Output | 5V/3A |
| Type | Brushless |
| Telemetry | Yes |
| Protection Features | Over-current, Over-voltage, Under-voltage, Over-temperature |
Lists innovative features of the ROXXY Smart Control range, including PC interface and integral sensors.
Details technical specifications for ROXXY 45A, 70A, and 100A Smart Control speed controllers.
Defines the approved applications for ROXXY Smart Control speed controllers, excluding man-carrying vehicles.
Provides crucial safety warnings and precautions for operating the speed controller, emphasizing correct sequence and polarity.
Explains how to connect the ROXXY Smart Control speed controller to the model's motor, receiver, and battery.
Explains how the battery charge counter works and details the procedure for resetting it to maximum capacity.
Details the procedure for configuring basic functions using the throttle stick, including parameter selection via stick movements.
Lists configuration options available when using the MULTIPLEX Launcher program via PC for telemetry and adjustments.
Explains the simplest method of configuring the ROXXY Smart Control using the MULTIPLEX Launcher software and USB lead.
Details how to activate and configure the governor function for helicopter models, including calibration procedures.
Explains how to select and configure the forward/reverse function with brake for car and boat models, including brake response.
To Next Page