Need help?Do you have a question about the Multiplex ROXXY MSB 70A and is the answer not in the manual?
General| Brand | Multiplex |
|---|---|
| Model | ROXXY MSB 70A |
| Category | Controller |
| Language | English |
Provides essential safety information and warnings for operating the ROXXY Smart Control to prevent injury and damage.
Default settings for battery type, cut-off, brake, motor direction, and timing for basic operation.
Default settings for telemetry displays and alarms for voltage, current, temperature, and RPM.
Ensures the motor only starts when the throttle is detected at the idle position.
Automatic LiPo cell detection and low-voltage cut-off/reduction for battery and model protection.
System protection against exceeding maximum current limits and operating temperatures.
Steps for powering up the system, including transmitter, throttle, and battery connection.
Allows setting essential basic functions using the throttle stick and controller feedback.
Enables adjustment of all settings and telemetry data using dedicated software.
Table detailing parameters like battery type, brake, and motor direction for throttle stick configuration.
Information on obtaining and using the MULTIPLEX Launcher software and required USB lead.
Guide to connecting the controller, altering settings, and saving data using the MULTIPLEX Launcher.
How Heli mode activates the governor to maintain constant rotor speed based on throttle input.
Enables forward/reverse function with brake at idle; explains throttle stick movement for control.
Solutions for issues like controller non-operation or lack of confirmation beeps.
To Next Page