Multiplex Tucan - Page 21

Seite 21
Small parts set
38 4 Control surface horN Injection-moulded plastic
39 5 Socket-head grubscrew Metal M 3 x 3
40 5 Swivel pushrod connector Aluminium 6 mm Ø
41 5 Washer Brass M2
42 5 Nut Brass M2
43 1 Plastic screw Nylon M 6 x 25
44 1 Captive nut Plated metal M 6 x 8
45 1 Magnetic latch Metal Ready made
46 3 Spring steel wire with Z Metal 1 Ø x 50 mm
47 1 Spring steel wire with Z Metal 1 Ø x 80 mm
48 2 Hook-and-loop, tape, hook Plastic 25 x 60 mm
49 2 Hook-and-loop tape, loop Plastic 25 x 60 mm
50 1 Hook-and-loop tape „back to back“ black / red 16 x 200 mm
51 1 Allen key Metal 1.5 A/F
51.1 1 Allen key Metal 2.5 A/F
52 1 Spinner backplate Plastic 26 mm Ø
53 8 Socket-head cheesehead screw M3 x 16
54 8 Washer Metal 12 mm Ø, 3 mm
55 1 Tucan aluminium motor bulkhead Die-cut aluminium
56 4 Spacer pillar aluminium 6 Ø x 54- 2 x M3
57 1 Elapor 5/6 driver with M6 hex. Nut with 5mm shaft/6mm bore
Undercarriage set
58 1 L.H. wheel leg Spring steel wire 4 mm Ø
59 1 R.H. wheel leg Spring steel wire 4 mm Ø
60 1 Nosewheel leg Spring steel wire 4 mm Ø
61 3 Airwheel with rubber tyre Plastic 57 mmØ/4.1mm
62 2 Main undercarriage bracket, R + L, Plastic Ready made
63 2 Main undercarriage cover, R + L, Plastic Ready made
64 1 Noseleg bracket Plastic Ready made
65 1 Nosewheel steering arm Plastic Ready made
66 4 Plated PT screw, 3.0 x 16 mm, cross-point Metal 3.0x16mm
67 20 Self-tapping screw Metal 2.9 x 9.5 mm
68 8 Collet Metal 4 mm
69 8 Socket-head grubscrew Metal M 3 x 3
70 1 Nosewheel pushrod, long, one Z-bend Metal 1.5 Ø x 151 mm
Spars
71 2 CFRP tube, Carbon fi bre reinforced plastic 8Øx5.4x470 mm
72 1 CFRP tube, Carbon fi bre reinforced plastic 8Øx5.4x370 mm
73 4 GRP rod, Glass fi bre reinforced plastic 1.3 Ø x 510 mm
Additional items in KIT+
74 4 UNI servo extension lead Plastic / metal 300 mm
75 1 Tiny-MG (UNI) servo Plastic / metal 30 x 12 x 30 mm
76 4 Tiny-S (UNI) servo Plastic metal 30 x 12 x 30 mm
77 1 „Tucan“ power set, Li-BATT powered,Various 374x128x63 mm