To Next PageTo Next Page
Need help?Do you have a question about the MULTISPAN LC-2046 and is the answer not in the manual?
General| Brand | MULTISPAN |
|---|---|
| Model | LC-2046 |
| Category | Cash Counter |
| Language | English |
Details input types like NPN/PNP proximity and Micro Switch for triggering.
Describes display characteristics and the function of control keys.
Specifies the unit's physical size and panel cutout dimensions.
Covers memory type, counting direction, and reset options.
Details the relay output type, rating, and number of contacts.
Outlines power requirements including voltage and consumption.
Specifies permissible operating temperature and relative humidity ranges.
Defines the ingress protection rating for the front side of the unit.
Provides the external physical dimensions of the counter unit.
Specifies the required size for mounting the unit in a panel.
Illustrates the terminal connections for power, input, and output signals.
Identifies the components on the front panel display.
Explains the functions of the keys in different operating modes.
Instructions for preparing the panel cutout and fitting the unit.
Specifies the correct torque for terminal block screws.
Guidance on regular cleaning and maintenance procedures.
General safety instructions for operating personnel and the instrument.
Instructions for safe wiring, circuit breakers, and cable selection.
Recommendations for storing and using the instrument within specified ranges.
Warnings and precautions related to electrical hazards during wiring.
Advice on reducing EMI through proper wiring and cable use.
Procedure to set the total length value for material counting.
Procedure to set the time value, affecting relay operation.
Procedure to set the roller diameter for accurate length calculation.
Configuring the speed range for meter/minute display.
Configuring the decimal point position for displayed values.
Selecting the counting direction (Up or Down).
Configuring pulses per revolution for accurate measurement.
Explains how the upper and lower displays indicate length and speed.
Describes relay energizing and de-energizing based on set length and time.
Details how the counter resumes operation after a power interruption.
Guidance on ensuring proper sensing area size for the proximity sensor.
