MULTISPAN PIC-9004 - Programming the Length Counter; Set Password; Set Length; Set Diameter

. 
. 
Total Length in Mtr.
Speed in Mtr/Min.
. 

.



Range: 00000.1 to 999999 Meter
Password : 25 FIX
Set Length value by pressing & key
Set Password value by pressing & key
: UP key increases value of individual digit
: UP key increases value of individual digit
: SHIFT key to go to next digit for changing
: SHIFT key to go to next digit for changing
value of the digit.
value of the digit.
set LENGTH
set PASSWORD
Range: 0000.01 to 9999.99 mm
Set Diameter value by pressing & key
: UP key increases value of individual digit
: SHIFT key to go to next digit for changing
value of the digit.
set DIAMETER
Procedure to Program the Length Counter
Page - 2
www.multispanindia.com
. 

Range: 00.1 to 99.9 sec.
Set Diameter value by pressing & key
: UP key increases value of individual digit
: SHIFT key to go to next digit for changing
value of the digit.
set TIME
Set SPEED Selection by pressing key
SLOW: MAX RPM 500
MEDIUM: MAX RPM 5000
FAST: MAX RPM 15000
set SPEED




Range: 0000.00, 00000.0 & 000000
Set Decimal point by pressing key
set DECIMAL POINT
Press key
to save & Exit.
PIC 9004
ENT
RST